Buy the width of the mat runner that best suits your staircase. Put on work gloves. Nail attaches tape . Measure one side, and mark with chalk.
DIY stair runner – As carpeting stairs often wear out faster than carpets on floors, it has to be replaced. Remove the old carpet from the stairs if necessary. Use your pliers; pull up some matte nub. Be careful not to break into the wood. Measure one of the steps, moving over the tread to measure the height of the trunk and starting at the top of the tread. Add 1 inch to your measurement and multiply this measure counting the stock before landing. Measure the stock and all landings that will mat with stairs, and add an inch. Add this and divide the amount by 36 to determine the number of turns on the car, the runners are required. You will need about the same amount of padding.
Beautiful Carpet Runners